The finished product of the suspending agent is obtained by mixing and stirring three concentrated solutions of the liquid A, the liquid B and the defoaming agent;

 2. application process 

 Spray gun to dry grains, glaze cabinet to dry grains, bell jar to drench. 

 3. Instructions for use 

 Method 1: First dilute the concentrate into a suspending agent/glue 

(1)First add 92% tap water, then add 0.05% antifoaming agent, stir evenly.  stir that sample for about 1 minute,  Mass production Stirring for about 10 minutes. 

 (2)Then add 4.5% and 5.0% of solution A and solution B respectively. Generally, add 4.5% of solution A and solution B respectively first. If the flow rate cannot reach  20-25 Second, add some more, note that A and B should be added in equal amounts.  The sample is stirred for about 3 minutes, and the batch production is about  Stir for 30 minutes.  The stirring speed is 80T20 rpm. 

using method 2: directly preparing dry grain glaze, 

 the preparation method comprise that following step of: adding in the following proportion and sequence, and uniformly stirring 

 Water 60%+ dry granules 35% (added according to process)+ defoamer 0.1%. 05%+ solution A 2. 8%+B solution 2. 8% .

 4, product advantages 

 (1)small addition amount, simple operation and environmental protection; 

 (2)can reduce the purchase cost of the axillary water of the suspending agent by 60 percent; 

 (3)the product has long quality guarantee period and can not be deteriorate within one year after bee sealed and stored